How to Pair SAMSUNG Soundbar with Subwoofer

There are a few things you’ll need in order to pair your Soundbar with a subwoofer. The first is an HDMI cable that connects the two devices together. You’ll also need an AUX cable to connect the Soundbar’s audio output to the auxiliary input on the receiver. Finally, you’ll need a speaker wire to run from the receiver’s main speaker outlet to where you want your soundbox installed.
Once everything is set up, just fire up your favorite movie and enjoy superior sound quality with immersive bass.

How to Pair SAMSUNG Soundbar with Subwoofer

Connect your soundbar and subwoofer as follows:
1. Strip the insulation off the wire of your power cord. Double-check that each end of the wire is clear (so you can see where it meets) and tin or coat one side with electrical tape to ensure a good connection when inserting into the Soundbar’s wall outlet.
2. Connect one end of the power cord to the Subwoofer’s input jack and plug it into an external power source like a regular household outlet or car charger .
3. Connect another end of the power cord to an empty audio channel on your Soundbar, using 3pin RCA connectors . Make sure both ends are firmly connected together so there is no slack in either cable – this can distort sound quality if distortion becomes noticeable during playback.
4. Finally, connect one end of the HDMI cable from your Soundbar to any compatible screen in your home cinema system OR output port on your TV , and use another 3pin RCA connector to connect that same end to a second audio channel on your Sound bar (for surround sound).

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *